Concrete Services

Why It’s Important to Repair Your Driveway

A well-maintained driveway adds beauty and value to your property. If your driveway shows signs of damage, it is important to repair them before they worsen. For more information visit Paving Companies Charleston SC.

Cracks greater than a quarter inch are a sign of significant issues that a professional should address. Leaving these cracked areas unrepaired can allow water in, which erodes the base and allows freezing temperatures to do more damage.

A smooth, unblemished driveway creates an excellent first impression and enhances your home’s curb appeal. It also adds value to your property and makes it easier for you to sell your home in the future. Cracked and damaged driveways, on the other hand, give a poor impression and reduce your home’s value. If you plan to sell your home, you must repair cracks and holes in your driveway as soon as possible.

Even hairline surface cracks in your driveway should be dealt with immediately. If left untreated, these cracks can widen and deteriorate the concrete further. This is more common in climates that experience frequent freeze-thaw cycles. The thaw and refreeze cycles cause the water to expand under the surface of your driveway, slowly weakening it. Eventually, the crack will open enough for dirt and weeds to get in and start growing.

When cracks appear, it is important to clean the surrounding area of the driveway thoroughly with a pressure washer or broom. This helps the patching material to adhere properly. It also ensures the cracks are filled, and the surrounding area is smooth.

For small cracks, you can use a concrete patching compound. This product is available in various sizes and can be applied with a caulking gun. Make sure to choose a compound designed for driveway repairs and include a primer or concrete bonding additive to help it stick to the existing concrete.

Large cracks are harder to fix, but they can be repaired with a special concrete repair kit with everything you need. These kits include a flexible backer rod to support the crack and pre-mixed concrete to fill it. You will need to apply the backer rod and then apply the concrete, which should be done when temperatures are above 60 degrees Fahrenheit.

Suppose you have a very deep crack that is sunken. In that case, it may be necessary to hire a professional concrete lifter, such as PolyRenewal, to inject polyurethane foam under the underwater section. This method is similar to mudjacking but uses more durable materials and offers better results.

It’s normal for driveways to sink a bit over time, but when sections begin to pull away from the garage floor, it’s time for a repair. If left untreated, sunken concrete can create tripping hazards and cause damage to vehicles that drive over it. Additionally, the depressions allow water to pool on the surface and erode the soil underneath, leading to additional concrete sinking over time.

The traditional solution is to remove the affected concrete section and pour a new slab. While this can solve the immediate problem, it’s an expensive and disruptive project. In addition, the new slab will likely look different in color and texture from the surrounding concrete.

Concrete can use mudjacking to lift sunken concrete sections without removing and replacing the existing slabs. This process involves drilling small holes in the surface of the concrete and then pumping a mixture of concrete and sand underneath the concrete to raise it back up. This method is far quicker and less expensive than tearing out and replacing the concrete, and it addresses many of the issues that can lead to sinking in the first place.

When the concrete in your driveway begins to sink, you must have a professional evaluate the cause and recommend a solution. Untreated sunken concrete will continue to deteriorate and can eventually break apart, leaving the foundation of your home exposed. If you’re looking for a concrete company that offers driveway repair services, make sure to read reviews and ask for references.

It’s also a good idea to determine whether the contractor offers free estimates for the work, which can help you decide if it’s worth the investment. Ultimately, fixing sunken sections of your driveway is crucial for the safety and appearance of your property, as well as to protect the value of your home. Uneven concrete is not only unsightly but can also lead to tripping and injury for pedestrians. It can also encourage the growth of algae and other unwanted plants, which can harm the integrity of the concrete.

A well-maintained driveway is an asset to your home, not only enhancing its curb appeal but also increasing the value of your property. But a clean, neatly-edged driveway doesn’t just look great; it also plays an important role in inhibiting soil erosion and protecting your driveway from chipping and cracking. The best way to keep your driveway’s edges looking good is by installing edging, and there are a variety of options available to suit your taste and budget.

Since asphalt is a non-permeable material, its edges tend to move slightly more than concrete edges. This movement is called upheaval, and it can cause your asphalt to crack or break off. Upheaval is a serious problem, but it cannot be fixed by patching or using chemicals; it requires complete removal and replacement of the affected area.

One solution is to install gravel edging, which is relatively inexpensive and easy to maintain. It also adds a natural look to your driveway and can help you avoid the need for costly paving repairs. If you want a more decorative appearance, brick edging is another option. It’s available in various colors and can complement any style of home.

Regardless of the edging material, installation begins by marking your desired path. If you’re uncomfortable doing this yourself, hire a professional to help. They’ll use stakes and string to create a visible guide you can follow. Make sure you double-check and adjust the marks as needed.

Next, dig a trench along the edges of your driveway and backfill it with sand or gravel. This will provide stability and prevent shifting as you work. Finally, smooth out the edges of your new edging with a broom. This will ensure the edging is firmly in place and give your driveway a professional finish.

Edging your driveway is a worthwhile investment that will protect it from damage and keep it looking beautiful for years. It’s especially important for asphalt driveways, which aren’t built into the ground like concrete driveways; they sit on top of the soil and are vulnerable to stress from vehicles driving over them. Proper edging can transfer this stress to the ground and minimize the risk of cracking or breaking off.

Weeds aren’t just unsightly; they also can cause damage to your driveway. Annual weeds and grasses like crabgrass, quackgrass, and dandelion thrive in the moist soil around and under driveways and can push through even the deepest gravel. Once established, they grow rapidly, spreading across the surface and filling in cracks.

The best way to deal with weeds is to prevent them from sprouting. You can do this by putting down a barrier of black plastic or a weed membrane between your garden soil and the gravel driveway. These materials block light from the weeds and stop their growth. However, these barriers can become punctured by heavy foot and vehicle traffic, so if you want to use them, you’ll need to reseal the driveway every couple of years.

Alternatively, a granular pre-emergent herbicide can be applied to your garden soil in the spring before the weeds germinate. These products kill existing weeds and keep them from growing, but they’re only effective for a few weeks, so you’ll have to repeat the process each year.

If you don’t mind weeds and have a good pair of gardening gloves, you can manually pull them. However, this is often time-consuming and can be difficult in wet conditions. You can also spray a commercial herbicide on the weeds, but it’s important to follow safety instructions and wear appropriate protective equipment.

Table salt is another easy, inexpensive, and effective weed killer. You can spread it by hand or dissolve it in water to make a spray that can be used on small patches of weeds. If you have a large area of weeds that need to be killed, use the rock salt used to de-ice roads and paths, as it may be more effective in killing the root system of the weeds.

Many homeowners need help to maintain a neat, tidy appearance on their gravel driveways and work with weeds that can quickly creep in and overtake the driveway. Whether they’re pushing through the gravel or climbing up through cracks in the pavement, these weeds can be a real pain to deal with.

Concrete Services

Concrete Retaining Wall Repair

Concrete Contractors Colorado Springs help to extend the life of retaining walls. Building staff should regularly inspect the walls for signs of deteriorated mortar joints, shifting, or crumbling. Drainage vents must be clear, and penetrations should be properly caulked or sealed.

Wall anchors are also a great solution to stabilize damaged retaining walls. They use an anchor rod connected to a plate within the soil and tightened.


A crack in a retaining wall may be an early warning sign that the soil behind it is shifting or that the retaining wall has a design flaw. It could also mean that the foundation stratum has settled along a section of its length and requires further strengthening by cement grouting under pressure, which must be carried out with specialist advice. It is possible to close vertical cracks by routing and sealing them, a non-structural repair technique that involves routing the cracked surface and filling it with a non-sag, high-performance sealant.

Some cracks in a retaining wall are inevitable, even with proper construction and design. The type and size of the cracks will determine whether a professional is needed to make structural repairs.

Most cracks in retaining walls occur because of the shifting and movement of soil under or behind the wall, primarily due to quick freeze-thaw cycles. The movement of soil can result in the concrete retaining wall bowing or leaning. It can also cause the retaining wall footing to fail and collapse.

Ideally, a retaining wall contractor will address problems such as soil erosion and drainage before building the retaining wall. This will prevent many issues that cause a retaining wall to crack or lean in the first place.

When the retaining wall is already showing signs of cracking, the contractor should be called to inspect to identify the cause and devise a plan for the retaining wall repair. Some of the most common causes include:

Insufficient backfill with gravel; poorly backfilled soil that was compacted or tamped; poor drainage, such as no French drains or weep holes; too much water in the soil, causing it to weigh more and put more pressure on the retaining wall; and overwatering the area and hillside causing it to wash away.

One of the most common solutions for a retaining wall exhibiting cracking and leaning is reinforcing the concrete with steel reinforcing rods or rebar. To do this, the contractor will install long threaded rods in the soil attached to large galvanized plates on the retaining wall. The plates connect the rods, secured in the ground with anchors. This helps to hold the retaining wall in place and provides resistance when the clay soil tries to shift or tip the retaining wall over.

If a retaining wall bows inward, it is considered serious and may require major repairs. Fortunately, this type of deterioration can often be corrected before the wall collapses.

Soil conditions or foundation problems can cause bowed retaining walls. For example, when a retaining wall fails to have adequate batter or pitch, the soil it retains can build up and push against the wall. In addition, a retaining wall built on expansive clay soils may experience hydrostatic pressure when water from rain or snowmelt is absorbed into the ground and causes it to swell. This puts additional pressure on the retaining wall and will cause it to bend inward over time.

Other common reasons for a retaining wall to bow are lack of proper drainage, improper footings, soil instability, and tree root growth. The first step in correcting this problem is to find the source of the pressure so it can be addressed.

A masonry expert can stabilize a concrete block retaining wall by adding anchors. These devices, also called dead-man anchors, help prevent the wall from bending inward. These are installed by drilling holes into the wall and running a steel rod through it. The rod is attached to an outside anchor buried underground in the soil.

Another option for a bowed retaining wall is to reinforce it with carbon fiber strips. This is a minimally invasive repair method that is often effective. The problem with this method is that it may not be able to stop the bowing of the wall, but it can reduce how much it bends inward.

The most expensive and invasive repair method for a bowed retaining wall involves installing steel channels or C-channel anchors. This requires digging outside the wall foundation and burying steel plates or channels in the soil. Holes are drilled into the wall, and threaded high-strength rods are run through them and then connected to the steel plates or channels in the soil.

The primary function of a retaining wall is to counteract the lateral forces exerted by soil. When a retaining wall fails, it poses a safety risk to flat areas like gardens, driveways, patios, and other structures. Collapsed walls can damage nearby homes, and soil displacement can create foundation problems. It’s important to act when you notice a retaining wall showing signs of distress. Early detection and repair saves money, prevents damage to surrounding property, and reduces the liability risks involved with collapsed retaining walls.

Common signs of a failing retaining wall include bulging, bowing, and cracks. These symptoms indicate that excessive lateral pressure pulls the retaining wall down. If the retaining wall continues to degrade, it can lead to total collapse and cause major damage.

Subpar construction is one of the leading causes of retaining wall failure. Using cheap materials and poor design increases the stress on the structure. Poor drainage is another factor. Having weep holes or a drainage system is important to maintain the structural integrity of a retaining wall. If water doesn’t drain properly or the soil isn’t graded away from the wall, it can put too much weight on the retaining wall.

Other reasons retaining walls can fail include soil erosion and earth movement. Tree roots can displace the soil behind a retaining wall, and earthquakes or other weather events can weaken and destabilize the wall. The wear and tear of time can also diminish a wall’s strength, which is why replacing older retaining walls with newer, more durable materials is important.

Once a retaining wall shows signs of distress, it’s vital to find an experienced repair team. Professionals can use wall anchors or helical tiebacks to restore the retaining wall’s structural integrity and help protect nearby structures. They can also reinforce the structure or regrade the soil to relieve excess stress on the retaining wall. The key is figuring out what’s causing the wall to fail and effectively addressing that problem. A free inspection will help pinpoint any issues and suggest the optimal repair strategy.

Retaining walls can be damaged by various factors, including weather conditions, soil erosion, incorrect drainage, and being hit by vehicles. Regardless of the cause, it’s important to catch structural damage as soon as possible. Otherwise, continued deterioration could collapse parts of the wall or the entire structure.

When retaining walls show deterioration, it’s time to call a contractor. Cosmetic issues like staining, flaking, spalling, and pitting are not just unsightly; they can be precursors to structural damage.

Unlike normal walls, retaining walls are built up against the ground and support heavy loads from the soil. Therefore, they’re designed to be strong and durable. Unfortunately, a lack of maintenance can lead to problems like cracks, bowing, and leaning.

Leaning retaining walls are especially dangerous because they pose a safety hazard for anyone walking near them. Furthermore, the resulting movement of soil can threaten foundations and basement walls on other parts of the property.

This retaining wall supporting the parking structure of a townhome complex was severely eroded in multiple locations. Its collapse would threaten the safety of vehicle drivers and pedestrians on the adjacent sidewalk and alleyway.

The contractor used a combination of helical tiebacks and a wall anchor system to stabilize the wall. Helical tiebacks are driven into the ground behind the retaining wall, and their anchor rods connect to earth anchors placed in augured holes within the soil. These rods then support the weight of the soil against the retaining wall.

The wall anchor system uses concrete forms to create a solid repair in the face of a weakened retaining wall. The contractor filled the forms with Fusion-Crete modified mortar mixed with sand and white Portland cement. The contractor left extra white Portland on hand, so he added colorants to the concrete mix to achieve repair colors other than the standard gray.

Retaining wall repair is an essential service that should be performed immediately. If you’re concerned about the condition of your retaining wall, contact our team today to schedule a free retaining wall assessment and repair quote.

Concrete Pavers

Facts About Concrete Pavers

Concrete pavers are a commonly used material for walkways, pathways and driveways. They can also be utilized in patios and fire pits. They are small, dense concrete units that interlock to create a durable paved surface.

They resist deterioration better than asphalt and normal poured in place concrete. They can be plowed, blown or shoveled and deicing salts are not harmful to them.


Concrete pavers are less expensive than other types of paving materials. They also have lower maintenance costs and are easier to repair than concrete slabs. They can be used to create a variety of hardscape designs, including patios, driveways, walkways, garden pathways, and fire pits. They are available in a wide range of colors, shapes, and textures to complement any design style. Some manufacturers even offer patterned pavers that mimic the appearance of real stone or brick.

They are easier to install than traditional poured concrete, and they don’t need time to cure. In addition, they can be easily removed and replaced if they become damaged. Pavers are also an environmentally friendly option, and they help to reduce noise and vibrations from vehicles and pedestrian traffic.

In terms of cost, pavers are comparable to other types of paving material, such as clay or brick pavers. However, they are usually much cheaper than natural stone paving products. They can be installed on a wider range of surfaces than other types of paving materials, making them an economical choice for a variety of applications.

Pavers are very easy to maintain and can be kept looking new with a regular sweeping and occasional cleaning. If there is any hard staining, a simple pressure washing treatment using suitable cleaning products can often remove it. Additionally, most pavers are made of durable material that resists damage from heavy traffic and weather conditions.

The most significant benefit of using concrete pavers is that they are very attractive and offer a wide array of color and texture options. They can be used to enhance the beauty of any landscape and are a great alternative to traditional asphalt or concrete paved surfaces. They can also be used as a retaining wall or edging for landscaping projects.

Uneven paved surfaces are not only unsightly but can pose a safety risk for pedestrians and vehicles. Pedestrians can trip on bumps and indentations, while vehicles may get stuck in sandy or gravel areas. This type of surfacing can also lead to tire or wheel damage, and it increases the wear and tear on vehicle shocks and axles. Concrete pavers provide a more stable and long-lasting surface for both vehicular and pedestrian use.


Concrete slabs can crack under pressure from shifting earth, freezing and thawing cycles, and other disturbances in the soil. This cracking can expose the composite material underneath to the elements, which can cause it to erode and become damaged or unsightly. Concrete pavers, on the other hand, are more resilient against these stressors. They’re manufactured to withstand up to 8,000 pounds per square inch, which is far more than the average residential concrete slab.

Pavers are also easier to repair than concrete slabs. If you need to repair a section of your paved driveway, it’s easy to simply remove the affected paver and replace it with another. This is much more difficult to do with concrete slabs, which usually require the entire surface be removed and then replaced, resulting in an expensive and time-consuming project.

Unlike slabs, pavers are made from interlocking units that allow them to shift and expand without breaking or cracking. This flexibility also makes them more resistant to stresses like rutting and erosion from vehicular traffic.

While pavers are more durable than concrete slabs, they still need to be maintained properly to keep them looking good and working well. Keeping them clean on a regular basis is important to prevent the buildup of dirt, oil, and other contaminants that can degrade the material over time.

It’s also a good idea to seal your paved surfaces periodically to protect the material from weathering, water damage, and other harmful effects. Pavers are also more resistant to fading than concrete slabs, as they don’t absorb stains as easily and are less likely to lose their color over time.


Concrete pavers are durable, but they’re not indestructible. They’re best used in areas that don’t experience heavy foot or vehicle traffic and require regular inspections to identify any signs of wear or damage. Repairs are typically easy, as the interlocking units are designed to be removed and replaced without removing any adjacent pieces.

The main maintenance requirement for concrete pavers is sweeping, washing and occasional use of cleaning solutions to remove debris such as dirt, leaves and bird droppings. Most stains can be removed with water, plant-friendly detergents and a stiff brush or broom. In some cases, a more aggressive solution may be necessary to remove stubborn stains such as grease and barbecue sauce stains. For deep stain removal, a solution of muriatic acid can be mixed with water and applied to the affected area. Be sure to follow the instructions printed on the container and test an inconspicuous area first.

Construction residue such as dust and dirt should be washed off of the paving surface regularly, and a penetrating sealer may be applied to minimize damage from deicing chemicals, prevent staining and enhance color. The resealing process should be completed within 90 days of installation, and it’s recommended that the sealer be tested in an inconspicuous area first.

While concrete pavers are more resistant to wear than monolithic concrete and black asphalt, they can still crack or break if not properly maintained. To reduce the risk of cracking and damage, concrete pavers should be installed in accordance with ASTM or CSA standards. These standards address freeze/thaw durability, dimensional tolerances and other manufacturing procedures that will ensure the pavers perform as expected.

In addition to concrete paving, the 30 Seconds All-Purpose Outdoor Cleaner is safe for all exterior surfaces and is perfect for restoring pavers that have become discolored from algae, mold or mildew. It can also be used to restore and protect brick, stucco, asphalt, canvas awnings, wood decks, metal, painted surfaces, gutters, siding and plastic outdoor furniture. Be sure to use a pressure washer with a low pressure setting, as excessive force can etch or damage the concrete pavers’ protective surface.


Concrete pavers are an excellent alternative to poured concrete for driveways, sidewalks, patios and other hardscape elements. They are manufactured in many textures and colors, providing a wide range of aesthetic options. They are also easier to install than concrete slabs. Pavers interlock together to create a patterned surface that can be put into service immediately, minimizing construction time and reducing traffic disruptions. This makes them ideal for commercial and residential applications.

Precast concrete pavers are manufactured to a specific size, thickness and strength. They contain several ingredients, including cement (usually Portland cement) and aggregates like sand and gravel. Other ingredients include water, and additives for color and specific performance characteristics. When installed properly over a well-compacted base, concrete pavers do not shift or crack under normal foot or vehicle traffic. However, pavers may settle in spots over time, and they are not as strong as poured concrete.

When a paved area is prone to standing water, a drainage system must be installed to prevent damage to the pavers and the soil underneath. This drainage system should direct the water away from the paved area through pipes or gravity. Pavers that are set in a gravel and sand base can be permeable, allowing the water to flow back into the ground.

Some natural stone pavers, such as marble, may develop issues when set in a sand-only installation. When marble is set in sand, it can experience lippage, which occurs when one tile juts up above another. This can lead to a sand-only installation being more difficult to maintain than a mortared or thinset installation.

To reduce the maintenance requirements of concrete pavers, they should be routinely swept and occasionally rinsed with a pressure washer. Regular sweeping will remove dirt, dust and leaves, and will help to limit the growth of weeds and moss. If a moss or weed problem persists, a chemical weed killer can be used to treat the affected areas. Pavers should also be sealed periodically, as this will protect them from staining and help to retain the joint sand.